PORTABLE DVD PLAYER V10M10_IM_EN_09182006
www.i-Luv.com
28
SETTING UP YOUR DVD PLAYER
General Setup Page
1. TV DISPLAY: Normal/PS, Normal/LB, Wide
a. Normal/PS: “PS” stands for “Pan Scan”. Select this option when the unit is
connected with a normal (4:3 aspect ratio) TV. If a wide-screen image is
displayed on the screen, some left and right edges of the image are cut out
automatically.
b. Normal/LB: “LB” stands for “Letter Box”. Select this option when the unit is
connected with a normal (4:3 aspect ratio) TV. If a wide-screen image is
displayed on the screen, the displayed image is automatically fit into the screen,
and the image will be displayed with some degree of distortion.
c. Wide: Select this option when the unit is connected to a wide-screen (16:9
aspect ratio) TV.
2. TV TYPE: NTSC / PAL
a. NTSC: When connected to a NTSC TV system, this option must be selected to
display an image correctly.
b. PAL: When connected to a PAL TV system, this option must be selected to
display an image correctly.
3. ANGLE MARK: ON / OFF
a. ON: If selected, it will show the angle mark on the screen when playing a DVD
recorded with the multi-angle view. This only works when there is an angle mark
on the disc.
b. OFF: If selected, the angle mark will not be shown on the screen.
4. OSD LANG: English / Spanish / German / French / Italian
a. Used to change the on-screen display language.
5. SCREEN SAVER: ON / OFF
a. ON: Activate the screen saver
i. The screen saver image appears when the unit stops or the image is
motionless for approximately 1 minute. This saver can keep the
screen from being damaged.
b. OFF: Disable the screen saver
Speaker Setup Page
1. Speaker Setup: LT/RT, STEREO
a. LT/RT: Select to hear the sound in the theatrical Downmix mode.
b. STEREO: Select to hear the sound in the stereo Downmix mode.
To Next Page
Loading...