iM3 42-12 User Manual

3
Components of the iM3 42-12 Scaler Unit:
1) Control Center
2) Power adjustment contact
3) Handpiece tubing with connector #O6950
4) Handpiece AUS #O6900 US #O1002
5) Control On/Off switch ring
6) Tip Insert- see p8
7) Ferrite Rod (Stack) AUS #O6860 US #O1291
8) Rod Pliers AUS #O6882 US #O1295
9) Steel Pin AUS #O6880 US #O1293
9a) Ferrite Rod Holder AUS #O6865 US #O1292
10) Corian Handpiece Holder AUS #O6925 US #O8000
11) Coolant flow control needle valve #I6780 US #P7056
12) Coolant supply tube (water or CLS), maximum 3 bar #O6930
13) Power Cord 110/240V AUS #06910 US #O2197
14) Power Cord Socket, power consumption 20 watts
15) Fuse Holder with spare fuse – Fuse Slow Blow 400mA 250V #O6891
16) On/Off Mains Power Switch
17) Power setting display Lights
18) Coolant Filter #W0530 US #P7235
The iM3 42-12 comes with 2 tip inserts.
1. A Universal Tip approximately 12mm (1/2”) long and US #O0809
2. A Perio Tip 18mm (3/4”) long. See p8 for tips US #O0806
Each unit is supplied with all of the above
Optional extra:
A Beaver Tail (Standard Straight) is available for gross debridement
US #O0805

iM3 42-12 Specifications

General

Brand	iM3
Model	42-12
Category	Media Converter
Language	English