EasyManua.ls Logo

Image IMSB62820 - Console Display and Jet Operation Issues; Spa Jets Continue Running; Console Display Codes

Image IMSB62820
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
10. SYMPTOM: THE SPA JET UNIT CONTINUES
TO RUN AFTER IT HAS BEEN SHUT OFF
a. To turn the main jets off, press pump button
once or twice. Note: If the actual spa water
temperature is below the set temperature, or if
the spa is running a filter cycle, the heater
pump/motor will not shut off.
11. SYMPTOM: THE LETTERS OH, FL, OR SN
APPEAR IN THE CONSOLE DISPLAY
OH: Overheat (spa is deactivated). Do not enter
the water. If the spa water has reached 112° F,
remove the spa cover to cool the water.
Overheating may occur if the filter cycle is set too
long. At 110° F the spa should reset itself. If the
high-limit sensor detects 118° F at the heater, the
spa will shut down. When the heater cools to 110°
F press any button to reset the spa. If the spa will
not reset, shut off power to the spa and call your
dealer or service organization.
FL: Flow. A pressure switch is not working. Call
your dealer or service organization.
Sn: Sensor (spa is deactivated). The high-limit
sensor or water temperature sensor is not work-
ing. Call your dealer or service organization.

Related product manuals