EasyManua.ls Logo

Image IMSB62820 User Manual

Image IMSB62820
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
®
USER’S MANUAL
QUESTIONS?
If you have questions, or if there
are missing parts, we will guar-
antee complete satisfaction
through direct assistance from
our factory.
TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL-
FREE CUSTOMER HOT LINE.
The technicians on our customer
hot line will provide immediate
assistance, free of charge.
CUSTOMER HOT LINE:
1-877-897-7493
Mon.–Fri., 8 a.m.–5 p.m. CST
Model No. IMSB62820
IMSG62820
Serial No.
The serial number is on a plastic sign
inside the spa behind the access
panel. Write the serial number in the
space above for reference.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
www.workoutwarehouse.com
new products, prizes,
fitness tips, and much more!
Access
Panel
Question and Answer IconNeed help?

Do you have a question about the Image IMSB62820 and is the answer not in the manual?

Image IMSB62820 Specifications

General IconGeneral
BrandImage
ModelIMSB62820
CategoryHot Tub
LanguageEnglish

Summary

Important Safety Instructions

Choosing a Location for the Hydrotherapy Spa

Assembly

Using the Hydrotherapy Spa

Wiring the Hydrotherapy Spa

Connect the spa to a 240-volt power source via a qualified electrician and GFCI.

Spa Shell Diagram

Using the Controls

Maintenance

Checking and Cleaning the Filter Cartridge

Steps to check, clean, or replace the spa's filter cartridge for optimal performance.

Water Chemistry

Guidelines for maintaining proper pH balance and sanitizing the spa water.

Maintenance Procedures

Winter Use and Care

Troubleshooting

Spa Will Not Operate

Check GFCI breaker and power supply if the spa fails to start.

Circuit Breaker or GFCI Trips

Troubleshoot tripping breakers by resetting or contacting an electrician.

Console Display and Jet Operation Issues

Console Display Codes

Interpret OH (Overheat), FL (Flow), and SN (Sensor) error codes on the console.

Related product manuals