Need help?Do you have a question about the Imagine DTD-5230 and is the answer not in the manual?
Introduces the DTD-523x series, its capabilities, and operating modes.
Lists the different DTD-523x models and their descriptions.
Explains the installation process, including unpacking, environment setup, and connection.
Details requirements for installing the clocks, including rack space and dimensions.
Provides dimensions for rack mounting and specifies operating temperature range.
Covers rear panel installation, input switch functions, and power supply details.
Explains how to operate the DTD-523x series of digital time/date display clocks.
Describes how to select control modes using rear panel DIP switches.
Details operation as a timecode reading clock, timecode failure, and display formats.
Covers manual time setting, power failure behavior, and auxiliary offset programming.
Details serial timecode input/output specifications, impedance, and level.
Details power input voltage, frequency, and consumption.
Lists time base options and control parameters like reference and offset.
Provides physical dimensions for rack-mount and desktop models.
Introduces servicing instructions for qualified personnel and outlines user-serviceable parts.
Describes the procedure for replacing the unit's fuse.
Explains the typical battery life and provides warnings for replacement and disposal.
Explains how to set the unit's operating voltage via jumper connections.
To Next Page
General