IMAGO IVN-x2P3 NB 2.8 User Manual

1
IMAGO IVN-x2P3 NB 2.8 – Quick Installation Guide
www.imago-video.com
Quick Installation Guide for IMAGO camera model:
IVN-x2P3 NB 2.8
Thank you for purchasing the Imago IP Camera. For its proper installation, follow this short instruction and user
manual to ensure the trouble-free operation and long life of the camera. If you have any questions during the
installation or use of the product, contact the technical support of your supplier.
Package contents
• Camera
• Wrench for removing the camera case
• Drill template
• Set of wall plugs (ø 6 mm) and screws
• Waterproof cap for RJ-45 connector
• CD with recording software iVMS-4200, Camera Installation Wizard
Fig.1: Package contents

IMAGO IVN-x2P3 NB 2.8 Specifications

General

Image Sensor	1/2.8" Progressive Scan CMOS
Max. Resolution	1920 x 1080
Night Vision	Yes
IR Range	Up to 30m
Model	IVN-x2P3 NB 2.8
Lens	2.8mm
Video Compression	H.264
Network Interface	10/100 Mbps
Power Supply	PoE (802.3af)
Operating Temperature	-30 °C to 60 °C (-22 °F to 140 °F)

Summary

Package Contents

Physical Installation of the Camera

Camera Mounting and Hole Drilling

Guidance on choosing a location, using a drill template, and drilling holes for cables and wall plugs.

Camera Housing and Sensor Module Adjustment

Instructions for removing the camera housing, adjusting the sensor module, and locking it in place.

Connection and Waterproofing

Steps for connecting the camera via data switch, using PoE, and applying waterproof caps for outdoor connections.

First Access and Software Setup

Default Camera Access Details

Provides default IP address, username, and password for initial camera access.

iVMS-4200 Software Installation

Instructions for installing the iVMS-4200 recording software from the CD or website.

Web Browser Camera Access

Guide to accessing the camera live view via web browser after installing WebComponents.

Restoring Factory Settings