EasyManua.ls Logo

IMAGO VisionCam XM - User Manual

IMAGO VisionCam XM
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Hardware Manual
"VisionCam XM"
Version 1.9 May 2020
Question and Answer IconNeed help?

Do you have a question about the IMAGO VisionCam XM and is the answer not in the manual?

Summary

Handling and Safety Instructions

Introduction

2.1 Concept

Details the core hardware concept, including sensors, processing units, and interfaces.

2.2 Operating Conditions

Specifies operating conditions, electrical parameters for power supply, RS-232, and I/O.

Interfaces

3.1 Power and I;O

Explains the 17-pin M12 connector pinout for power supply and digital I/O signals.

3.2 100 Mbit;s Ethernet (M12; IP65)

Details the 4-pin M12 D-coded connector for 100 Mbit/s Ethernet connections.

3.3 1 Gbit;s Ethernet (M12; IP65)

Details the 8-pin M12 X-coded connector for 1 Gbit/s Ethernet connections.

3.4 1 Gbit;s Ethernet (RJ45; IP20)

Details the RJ45 connector for 1 Gbit/s Ethernet connections and LED indicators.

3.5 Signal LEDs

Explains the function and status indication of the device's signal LEDs.

3.6 Digital I;O

Details the digital I/O interface, including opto-isolated inputs and outputs.

3.7 LED Flash Controller

Explains the LED flash controller, parameters, and load voltage recommendations.

3.8 RS-422

Details the optional RS-422 interface, its connector, and signal functions.

Image Sensors

4.1 Aptina WVGA MT9 V032 M; MT9 V032 C

Detailed specifications for the Aptina WVGA MT9V032M/MT9V032C image sensor.

4.2 Aptina WXGA MT9 M021 M; MT9 M021 C

Detailed specifications for the Aptina WXGA MT9M021M/MT9M021C image sensor.

4.3 e2 v SXGA EV76 C560 M; EV76 C560 C

Detailed specifications for the e2v SXGA EV76C560M/EV76C560C image sensor.

4.4 e2 v UXGA EV76 C570 M; EV76 C570 C

Detailed specifications for the e2v UXGA EV76C570M/EV76C570C image sensor.

4.5 ON Semi. PYTHON 5000 NOIP3 SN5000 A

Detailed specifications for the ON Semi. PYTHON 5000 NOIP3SN5000A image sensor.

4.6 AWAIBA Dragster DR-2 k-7, DR-4 k-7

Details for AWAIBA Dragster DR-2k-7 and DR-4k-7 line scan sensors.

4.7 AWAIBA Dragster DR-4 k-3.5, DR-8 k-3.5

Details for AWAIBA Dragster DR-4k-3.5 and DR-8k-3.5 line scan sensors.

4.8 AWAIBA Dragster DR-2 x2 k-7, DR-2 x4 k-7

Details for AWAIBA Dragster DR-2x2k-7 and DR-2x4k-7 dual line scan sensors.

4.9 AWAIBA Dragster DR-2 x2 k-7-RGB, DR-2 x4 k-7-RGB

Details for AWAIBA Dragster DR-2x2k-7-RGB and DR-2x4k-7-RGB sensors.

4.10 PROPHESEE CCVS1 STMU0300 A

Details for the PROPHESEE CCVS1STMU0300A event-based sensor.

Mechanical Drawings

5.1 M12 100 Mbit;s IP65

Provides mechanical drawings and dimensions for the M12 100Mbit/s IP65 model.

5.2 RJ45 1 Gbit;s IP20

Provides mechanical drawings and dimensions for the RJ45 1 Gbit/s IP20 model.

5.3 M12 1 Gbit;s IP65

Provides mechanical drawings and dimensions for the M12 1Gbit/s IP65 model.

5.4 RJ45 1 Gbit;s Line Scan

Provides mechanical drawings and dimensions for the RJ45 1 Gbit/s Line Scan model.

5.5 Additional Information (Tubes and BFD for S-Mount)

Provides information on available tubes and minimum Back Flange Distance (BFD).

Support

History

IMAGO VisionCam XM Specifications

General IconGeneral
BrandIMAGO
ModelVisionCam XM
CategoryDigital Camera
LanguageEnglish