Imaje Jaime 1000 S4 Plus User Manual

Jaime 1000 S4 Plus
PRINTER MANUAL
A13540
IMAJE SA. reserves the right to alter the specifications and the design of this product at any time without giving prior notice.
Reproduction, in whole or in part, is not allowed.
IMAJE SA. Siège social : 9, rue Gaspard Monge B.P. 110 - 26501 BOURG-LES-VALENCE Cedex - France
Téléphone : 04 75 75 56 00 - Télécopie : 04 75 82 98 10
Edition Anglaise

Imaje Jaime 1000 S4 Plus Specifications

General

Brand	Imaje
Model	Jaime 1000 S4 Plus
Category	Printer
Language	English

Summary

Foreword

Generalities

1 Installation

Printer installation requirements and procedures.

2 Ink Jet Printing

Explanation of the ink jet printing technology.

3 Preparing the Printer

Steps to prepare the printer for operation.

4 Editing a Message

Process for creating and modifying messages.

5 Editing Symbols

Creating and storing custom symbols or logos.

6 Production

Starting and managing the printing process.

Introduction to Printers in the Jaime 1000 Plus Range

2 The Operator Interface

Components of the operator interface: keyboard, display, indicators.

3 Printing Head

Description and components of the printer's printing head.

4 Ink Circuit

Diagram and location of ink circuit components.

7 Information Specific to S4Plus Hi-P65

Specific details for the S4Plus Hi-P65 model.

Utilization

2 How to Reach the Desired Function or Command

Navigating menus to find functions and commands.

4 Using the Keys

Explanation of direct access and other function keys.

6 Detailed Description of Each Function or Command

In-depth explanation of printer functions and commands.

7 PRODUCTION Menu

Functions for printer operation and maintenance.

7.1 Printer

Starting and stopping the printer and jets.

7.1.1 Start-up

Procedure for starting the printer and jets.

7.2 Message

Selecting, creating, and managing messages.

7.3 Status / Printhead

Viewing printer status and jet maintenance information.

7.4 Maintenance

Procedures for printer maintenance tasks.

7.4.1 Clear Faults

Procedure to clear printer faults and errors.

7.4.2 ELV Status Modification

7.4.3 Flushing

Procedure for flushing the printer's ink circuit.

Routine Maintenance

2 Routine Maintenance Procedures

Detailed steps for common maintenance tasks.

2.2 Cleaning the Heads

Steps for cleaning the printer's ink heads.

2.3 Rinsing the Umbilical/Head Assembly

Procedure for rinsing the head and umbilical assembly.

2.5 Complete Flushing of the Printer

Steps for a complete printer flushing operation.

2.5.1 Manual Rinsing

2.5.2 Rinsing with the Drain/Rinse Tool

2.7 Replacing the Pressurisation Air Filter S4 Plus Hi-P65

Troubleshooting

2 Preliminary Checks

3 General Printer Operating Parameter Checks

4 Diagnostics Help

4.3 At Printer Start-up

4.4 At Jet Start-up

4.5 During Printing

5 Adjustments

5.1 Break-off Point Adjustment

5.2 Adjusting the Jet in the Gutter

5.3 Pressure Motor Speed Adjustment

5.4 Four Jets Head Adjustment

Consumables

4 Consumables and Safety

Technical Specifications

Performance Parameters

Input / Output Connection and Accessories

1 Access to the "Industrial Interface" Card

2 The Inputs

2.1 The Object Detection Cell

2.3 Tachometric Generator

2.4 Data Transmission Inputs by the Parallel Interface ("Message Selection" Mode)

3 The Outputs

3.1 "General Alarm" Output

3.2 "Jet Alarm" Output

3.3 Electrical Characteristics of Alarm Outputs

3.4 Start Printing Signal Output