imani i2 Plus - Parts to be Cleaned and Disinfected; Hands-free Cup Set Assembly

Protector
Connector
Valve
Funnel
Cap
When using with as a hands-free pump
After assembling
the hands-free cup,
please close the cap.
※ When assembling the Connector and
Valve, please align them in the correct
position as outlined above.
● How to assemble the Hands-free Cup Set : ① Assemble the Connector
● How to assemble the Hands-free Cup Set : ② Assemble the Cup
● How to assemble the Hands-free Cup Set : ③ Assemble the Funnel
① Insert the connector
into the cup.
② When attaching the
protector to the cup,
please press firmly.
Make sure the valve is aligned in the
correct position in the cup
as shown above.
Parts to be cleaned and disinfected
※ The'cap' part is not included in the breast pumps component.
Valve Protector Connector Insert Funnel CapCollection Cup
When using with another pump
by connecting the hose