63B + 63C VERSION A
TECHNICAL ASSISTENCE
We recommend to read carefully the informations here included to install, to use and to maintain correctly
and safely this machine.
Please always refert to this instruction manual in case of need of the assistence service staff and keep it
carefully for all the life of the machine . The reference number is shown on the cover.
GENERAL INDEX
1 - Machine description- applied norms -marking 63 DE
2 - Technical specifications 63EA
3 - Foreseen use and controindications 63FB
4 - Moving and transit 63GA
5 - Installation - minimum requirements 63HA
6 - Fittings assembling 63IA
7 - BAND CHOICE 63ISA
8 - Machine setting for starting 63LA
8.1 - Cooling system "
8.2 - Electrical connection "
8.3 - BAND TENSION "
9 - Starting 63MY
9.1 - Keyboard "
9.2 - Cut end setting "
9.3 - Displayed informations "
9.4 - Controls description 63MA
9.5 - Cutting setting "
9.6 - Semiautomatic cycle "
9.7 - E.S.C working ( Electronic Speed Control ) "
9.8 - Stop/ EMERGENCY STOP "
9.9 - Head rotation for oblique cutting "
9.10-Saw frame inclination "
9.11-Supplementary vice for clamping profiles ( if equipped with it ) "
10 - Adjustments 63NA
10.1 - Vice "
10.2 - Band "
10.3 - General working pressure "
10.4 - Cutting speed "
11 - Maintenance "
11.1 - Recurrent maintenance "
11.2 - BAND REPLACEMENT "
11.3 - BAND RUNNING-IN 63NRA
11.4 - Machine running-in 63NRE
12 - Defects identified
12.1 - Machine
12.2 - Band
13 - Working schemes
13.1 - Electrical circuit QE0010B2
13.2 - Hydraulic circuit QE0039A5
14 - Machine noise 63PA
15 - The draining of used / made substances 63RA
16 - Machine demolition 63SA
17 - Guarantee norms
18 - SPARE-PARTS
18.1 - Norms to request the spare-parts 63OA
18.2 - Part drawings RI0020A2+RI0021A4
18.3 - OILS AND LUBRICANTS
To Next Page
Loading...