To Next PageTo Next PageWhy my Imetec M3101 doesn't suction well?
If your Imetec Vacuum Cleaner isn't suctioning well, it could be due to a few reasons. First, the dust collection system might be full; in this case, empty the dust collection compartment. Another potential cause is a clogged filter; try cleaning or replacing the filter. Lastly, ensure that the filter is correctly fitted, as an improperly fastened filter can also reduce suction.
What to do if my Imetec M3101 Vacuum Cleaner does not go on?
If your Imetec Vacuum Cleaner isn't turning on, there are several things to check. First, ensure the battery is charged. Also, make sure the plug is disconnected from the socket, as a battery protection system prevents startup when the plug is connected. Finally, verify that the ON/OFF switch has been pressed.
General| Dust capacity | 3 liters |
|---|---|
| Weight | 4.2 kg |
| Power | 800 W |
| Type | Cylinder |
| Cord length | 5 m |
Essential guidelines for the safe handling and charging of rechargeable batteries.
Explanation of common symbols used in the manual for clarity and safety.
Step-by-step instructions for assembling the vacuum cleaner components.
Details on included attachments and their specific uses for cleaning tasks.
Steps to prepare the appliance before first use, including charging.
Guide on operating the appliance in its main stick vacuum configuration.
Instructions for detaching and using the handheld mini-vacuum component.
Procedures for cleaning the main body of the vacuum cleaner.
Detailed steps for emptying and cleaning the dustbin and filters.
Methods for cleaning the rotating brush and attachments.
Instructions for disposing of the product's packaging responsibly.
Guidance on the correct disposal of the appliance itself according to regulations.
Specific instructions for safely disposing of the rechargeable batteries.
Information on how to remove or replace the battery, requiring professional assistance.
