What to do if the container rises while processing food in my Imetec Food Processor?
If the container rises while processing food in your Imetec Food Processor, it might be due to food pieces getting stuck between the container and the blades. To resolve this, unplug the power cord from the socket, remove the lid, and reposition the container. After that, close the container with the lid and continue processing.
How to chop food evenly with Imetec Food Processor?
If the food is not being chopped evenly in your Imetec Food Processor, try using the pulse mode instead of continuous mode. Also, make sure not to overfill the container. If you have, remove some of the ingredients before continuing. If the issue persists, wait for the blades to stop completely, remove the motor casing and the splash-proof cover, mix the ingredients with a spatula, then close it up again and continue processing in pulse mode.
What to do if meat is not chopped properly in Imetec Food Processor?
If the meat is not being chopped properly in your Imetec Food Processor, make sure to chop the meat into 1 cm pieces and remove any cartilage. Also, do not exceed the maximum quantity of 300 g.
Why is parsley not chopped properly in my Imetec Food Processor?
If the parsley is not being chopped properly in your Imetec Food Processor, try repeating the operation using dry parsley.
Key safety instructions and warnings for the safe use of the appliance.
Explanation of warning and prohibited symbols used in the manual.
Lists and identifies the components of the appliance and its accessories.
Step-by-step instructions for assembling the appliance correctly.
Guidelines and precautions for operating the appliance.
Procedures for cleaning and maintaining the appliance after use.
Common problems and their solutions for the appliance.
Information on obtaining repairs, spare parts, and warranty details.
General| Power | 1000 W |
|---|---|
| Speed Settings | 2 |
| Pulse Function | Yes |
| Bowl Material | Plastic |
| Blade Material | Stainless Steel |
To Next Page
