Do you have a question about the IMG STAGE LINE MEO-215 and is the answer not in the manual?
Overview of the equalizer's front panel controls and indicators.
Details of the equalizer's rear panel connectors and switches.
Describes the primary uses and versatility of the MEQ-215 equalizer.
Instructions for physically placing and installing the equalizer unit.
Guidance on connecting the equalizer, inputs, outputs, and grounding.
Guide to initial setup, frequency range info, and level adjustment.
Adjusting low frequencies (25 Hz-250 Hz) for noise suppression and tonal balance.
Adjusting midrange frequencies (400 Hz-2.5 kHz) for clarity and presence.
Adjusting treble frequencies (4 kHz-16 kHz) for transparency and brilliance.
Setting input levels to match output volume when bypassing the equalizer.
| Channels | 2 |
|---|---|
| Frequency Range | 20 Hz - 20 kHz |
| Total Harmonic Distortion | <0.05% |
| Equalizer Range | ±12 dB |
| Power Supply | 230 V AC, 50 Hz |
| Type | Stereo |
| Inputs | 2 x 6.3 mm jack |
| Outputs | 2 x 6.3 mm jack |
| Equalizer Bands | 15 per channel |