To Next PageTo Next Page
Need help?Do you have a question about the IMG STAGE LINE MPM-400 and is the answer not in the manual?
Essential pre-operation instructions and advice for safe usage.
Detailed identification of all controls, inputs, and indicators on the front panel.
Detailed identification of all ports and connectors on the rear panel.
How to connect CD players, tape decks, keyboards, etc.
How to connect microphones to CH1 and CH2 inputs.
Connecting a recording device to the REC output.
Using MASTER and REC outputs for further amplification.
Connecting external effect units via SEND/RETURN jacks.
Connecting speakers and impedance considerations.
Connecting headphones to the unit's jack.
Connecting the unit to the mains power supply.
Initial setup, powering on sequence, and volume caution.
Step-by-step guide for setting levels, tone, pan, and balance.
Monitoring and adjusting audio source levels and ratios.
General| Channels | 4 |
|---|---|
| Frequency range | 20 Hz - 20 kHz |
| S/N ratio | > 80 dB |
| USB | No |
| Microphone Inputs | 2 |
| Phantom Power | Yes |
| Equalizer | 3-band EQ |
| Type | Analog |
| Inputs | 2 x Mic |
| Outputs | Main Out, Monitor Out |
| Equalizer Details | High, Mid, Low per channel |
| Dimensions (alternate) | 247 x 56 x 237 mm |
| Outputs (alternate) | Main Out, Monitor Out |
| EQ Details | 3-band EQ |
| Power Supply (alternate) | External power adapter |
| Dimensions (alternate 2) | 247 x 56 x 237 mm |
| Weight (alternate) | 1.6 kg |
| Line Inputs | 2 stereo (6.3mm jack) |
