To Next PageTo Next Page
Need help?Do you have a question about the IMG STAGE LINEle MMX-802 and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Equalizer | 3-band |
| Main Output | 2 x XLR/6.3 mm jack, balanced |
| Type | Mixer |
| Effects | Built-in digital effects |
Details on input jacks, selector buttons, gain, EQ, filters, and level controls for mono and stereo channels.
Explanation of master, auxiliary, FX send, REC, PLAY, CTRL ROOM, PHONES outputs, and routing buttons.
Information on the power switch, indicator LEDs, phantom power supply, and VU meter controls.
General safety rules, handling, environmental conditions, and proper use of the mixer and power supply.
Precautions for handling, cleaning, repair, and proper disposal of the mixer and power supply unit.
Describes the mixer's design for stage use by musicians, with 6 channels for mixing and monitoring.
Details on connecting audio recording units and using monitoring systems for playback and control.
Instructions for setting up the mixer as a table-top unit or mounting it in a standard 19-inch rack.
Guide to connecting audio sources, effect units, recording devices, and monitoring systems to the mixer.
Procedure for setting up input channels, including gain, EQ, and level adjustments using VU meter.
Guide to adjusting volume ratios, mixing monitor signals, and setting pan/balance for audio sources.
Instructions for adjusting the FX SEND and AUX SEND levels for effects and monitoring.
How to monitor signals using headphones or a control room system, selecting various sources.
Instructions for modifying the Aux SEND output from pre-fader to post-fader for advanced use.
Detailed technical data including inputs, outputs, frequency range, THD, S/N ratio, and power requirements.
Definitions of key technical terms used in the manual for better understanding.
