To Next PageTo Next Page
Need help?Do you have a question about the IMG Stage Series and is the answer not in the manual?
General| Brand | IMG |
|---|---|
| Model | Stage Series |
| Category | Speaker System |
| Language | English |
Connects signal source with line level to the unit.
Routes input signal to another active speaker system.
High-pass filter switch and volume gain adjustment.
Limiter, signal, and power LEDs with power switch and fuse holder.
Connection point for the mains cable (230 V~/50 Hz).
Indoor use, protection from liquids, heat, humidity, and proper placement.
Warning of mains voltage, professional servicing, and correct plug handling.
Cleaning advice, warranty conditions, and environmentally friendly disposal.
Positioning the unit on surfaces, stage monitoring, and mounting options.
Connecting signal sources to input and routing to output.
Connecting the unit to the mains socket using the provided cable.
Turning the unit on and adjusting the volume with the gain control.
Using the high-pass filter and understanding limiter and signal LEDs.
Procedure for safely powering down the speaker system.
Detailed technical data for PAK-210MK2, PAK-212MK2, and PAK-215MK2 models.
Diagram and explanation of connector pin assignments.
