Need help?Do you have a question about the IMI PNEUMATEX Pleno PI Series and is the answer not in the manual?
Provides contact details for customer service and the head office.
Details the standard components included in the Pleno PI_ delivery.
Lists optional accessories and modules that can extend Pleno PI_ functionality.
Explains the role and features of the TecBox unit.
Describes the BrainCube's intelligent control capabilities for system operation.
Details the fillsafe water make-up functionality and its safety features.
Outlines the automatic program for initial filling of the consumer system.
Introduces additional modules like ComCube DCD and DCA for enhanced features.
Overview of TecBox modules (PI 6.1, 6.2, 9.1) and optional equipment for setup.
Describes the BrainCube's functions, including secure operation, key lock, and modes like menu, standby, and check.
Details the BrainCube's display components: analogue display, illuminated display, and message/status lines.
Guide for setting the static height parameter (HST) on the BrainCube, including two variants.
Instructions for configuring the temperature limit (TAZ) and safety valve response pressure (PSV).
Explains the BrainCube's calculations for minimum, initial, and maximum system pressures based on parameters.
Details the main menu items (Start-up, Check, Parameter, Info) for navigating BrainCube functions.
Lists and describes essential parameters configurable via the BrainCube menu, such as language, date, time, and water make-up quantity.
Explains how to view, select, and acknowledge messages displayed by the BrainCube system.
Provides guidance on identifying and resolving fault messages, including fuse checks and contacting support.
Provides essential information and warnings regarding TecBox installation, including environmental requirements and handling.
Details installation steps for Pleno PI 6.1/6.2 and Pleno PI 9.1 models, including mounting.
Outlines guidelines for connecting the TecBox to the consumer system and mains water, including standard pipe sizes.
Illustrates pipe connection configurations for Pleno PI_ with Statico, Compresso, and Transfero systems.
Outlines requirements and mains power specifications for TecBox electrical installation.
Details the wiring for the BrainCube rear panel, including 230V and SELV terminal boxes, and mains plug connection.
Explains the RS 485-1 interface for connecting ComCube modules and receiving water make-up signals.
Details the ComCube DCD and DCA options for extending BrainCube functionality and data output.
Describes how to network TecBoxes via RS 485-1 for water make-up signal exchange between units.
Provides a comprehensive terminal plan illustrating connections for power, signals, and outputs on the BrainCube.
Lists the necessary conditions and checks before performing the initial start-up of the BrainCube system.
Guides on switching on the BrainCube and navigating the initial welcome screen during start-up.
Details the options for activating/deactivating and configuring water make-up settings during the start-up phase.
Explains how to select between 'standby' and 'auto' operating modes after completing the initial start-up.
Provides parameter settings for operating the BrainCube with ComCube DCD communication modules.
Details configuration for the ComCube DCA to output PIS pressure signals, noting customer responsibility for conversion.
Instructions for configuring BrainCube units for parallel operation via RS 485-1 to manage water make-up signals.
Explains the basic principles distinguishing operating modes and details the 'auto' mode with its sub-modes.
Describes the 'standby' mode for maintenance and the 'menu' mode for accessing functions, testing, and maintenance.
Guides users on how to navigate, view, and acknowledge messages displayed on the BrainCube interface.
Provides instructions for identifying, responding to, and resolving fault messages, including contacting customer service.
Outlines recommendations for commissioning acceptance tests and periodic inspections based on local regulations.
Details the procedure for safely disassembling the Pleno PI_ TecBox, emphasizing depressurization and system isolation.
Covers product application scope, adherence to directives, and requirements for qualified installation and operating personnel.
Addresses requirements for the installation environment, floor support, ventilation, and the quality of materials used.
Details safety aspects related to observing parameters, electrical connections, protection against accidental contact, and water quality.
Lists and defines key technical terms, standards (e.g., PED, EN 60335), and specifications.
Specifies media compatibility (water/glycol mixtures) and the operational working pressure ranges (DPP) for different Pleno PI_ models.
Declares conformity with relevant EC directives and lists the harmonized standards applied to the Pleno PI_ products.
General| Brand | IMI PNEUMATEX |
|---|---|
| Model | Pleno PI Series |
| Category | Water System |
| Language | English |
To Next Page
