Need help?Do you have a question about the Immergas CAR V2 and is the answer not in the manual?
General| Type | Remote control |
|---|---|
| Features | Temperature control |
| Display | LCD |
| Compatibility | Immergas boilers |
| Power source | Battery |
Guidance for proper installation of the CAR V2 remote control and its connections to the boiler.
Step-by-step instructions for physically mounting and connecting the CAR V2 remote control unit.
Information about the display back-lighting feature and its operational conditions.
Procedures for setting the current date and time on the CAR V2 remote control.
How to choose between different operating modes: Stand-by, Summer, Winter, and Cooling.
Adjusting the desired domestic hot water temperature using the selector.
Setting the timer for domestic hot water in storage tank units.
Setting and maintaining a constant room temperature manually.
Automatic regulation of room temperature based on programmed comfort and economy levels.
Temporarily overriding automatic settings by manual temperature adjustments.
Adjusting the boiler flow temperature for optimal room heating.
How the anti-freeze function protects the system by maintaining a minimum room temperature.
Using an external temperature probe to adjust flow temperature curves in winter.
Setting and maintaining a constant desired room temperature manually for cooling.
Automatic regulation of room temperature for cooling based on programmed levels.
Temporarily overriding automatic cooling settings with manual temperature adjustments.
How flow temperature is managed automatically during cooling operation.
Adjusting the desired comfort and economy temperatures for heating and cooling modes.
Setting daily/weekly time programs for room temperatures and DHW.
How the CAR V2 remote control monitors boiler status and displays error codes.
Procedures for resetting the boiler after specific types of errors occur.
How to perform a general or factory reset on the CAR V2 remote control itself.
Setting the display language for the CAR V2 remote control interface.
Customizing regulation parameters like minimum flow temperature and offset.
Activating a holiday program to deactivate heating and DHW functions for a set period.
Enabling the anti-legionella function to periodically heat the cylinder.
Configuring the CAR V2 remote control for remote operation via telephone.
Information regarding access to functions protected by a four-character code.
Activating, deactivating, or modulating the room probe for temperature regulation.
Setting reduced flow temperature during economy periods for energy saving.
Setting the room temperature threshold for activating the anti-freeze protection.
Note that the ZONE function is not available on this specific model.
Setting the interval for periodic maintenance and entering contact information.
Energy efficiency class and description of the modulating remote control according to regulations.
To Next Page
