Immergas CAR V2 - 7.4 Flow Temperature

22
7.4 Flow temperature.
From the cooling function ( ), the system ow tempera-
ture during normal operation is managed automatically
by the CAR
V2
remote control on the basis of the set room
temperature. If the room probe is excluded (Para. 12.1), the
ow temperature will not be managed by the CAR
V2
remote
control but will be dened according to the parameters set
in the internal hydronic unit.
If the external temperature probe is present, the ow tem-
perature will be set according to adjustments in the internal
hydronic unit.
N.B.: modulating ow temperature operation is only present
on pre-set Immergas appliances.