Immergas Code 3.030863 - Page 11

11
Operation in manual mode
External probe enabled
Anomaly present
4. MAIN PAGE SETTING.
e area to which the information refers is shown at the
centre of the display. It is possible to display the information
on the Zone and on the domestic hot water part.
Simply press the main switch to cyclically go from Zone to
DHW (Domestic hot water).
e lower part of the display shows the parameter that can be
changed (it varies according to the appliance conguration),
it is possible to change the value by turning the main switch
and pressing it to conrm the parameter change.
e values that can be found according to the congura-
tion, are:
- Set room: denes the room zone temperature.
- Set ow: denes the system's ow temperature to the
zone.
- Flow oset: changes the operation curve of the external
probe.
- DHW (Domestic hot water) set: this denes the DHW
temperature.
5. SUMMER MODE FUNCTIONS.
With the Zone Remote Panel in Summer mode ( ), only
the production of DHW is enabled.
e DHW setpoint can be set from the dedicated page.
If you want to regulate the request for domestic hot water
in distinct time bands (Comfort and Economy), it can be
set in the Sanitary Setpoint Menu, if the device to which
the Zone Remote Panel is connected includes this logic.
e time slots used are the same as those used for setting
the area’s heating / cooling request.