IMOU Siren - Introduction; Start to Use

2
Introduction 2
LED Indicator Status
Device Status
Red light fast flashes
Booted up or pairing with Alarm Station
Red light is on for 2s,and then turns off
Pairing succeeded
Red light slowly flashes for three times,
and then tuns off
Pairing failed
Start to Use 3
Imou APP
If Imou app has added the Alarm Station,add the detector according to app prompts.
Note: If the detector has paired with another Alarm Station, you can undo previous
pairing by quickly clicking tamper switch for 5 times to clear the existing
pairing configuration.