Need help?Do you have a question about the Impassa SCW9057-433 and is the answer not in the manual?
Instructions on how to clean the alarm system components safely and effectively.
Guidance on identifying and resolving common problems with the alarm controller or telephone line.
Details on the system's capability to monitor fire detection devices like smoke detectors.
Information on the system's ability to monitor carbon monoxide detectors.
Covers system testing, monitoring, general operation, and essential maintenance tasks.
How to arm the system in Stay mode, securing the perimeter while allowing interior movement.
Procedures for night arming and understanding exit delay settings.
Steps for arming the system in Away mode, securing all zones.
Instructions on how to disarm the security system using an access code.
Methods for arming or disarming the system using a wireless key.
Describes the different alarm sounds for intrusion, fire, and CO, and their priority.
How to program and use bypass groups for selected zones.
Guide to programming user access codes and their associated attributes.
Details on attributes like Supervisor, Duress, and Zone Bypassing for access codes.
Attributes controlling zone bypassing and remote SMS access.
Managing siren squawks and erasing access codes/proximity tags.
Adjusting keypad display brightness and contrast levels.
Adjusting the audible buzzer level for keypad feedback.
Enabling or disabling notifications for un-disarmed systems at programmed times.
Understanding the sequence of SMS notifications sent by the control panel.
How to control the security system remotely via SMS commands.
Sending general messages to the keypad display via SMS.
Overview of the programmable function keys on the wireless key.
Explanation of the icons displayed on the wireless key's LCD.
Functionality of the wireless key's buzzer and keylock modes.
Procedure for testing siren output and keypad display functionality.
How to perform a walk test and allow computer access to the system.
Reference table for programming and managing user access codes.
Reference table for sensor and zone details.
Reference table for configuring SMS telephone numbers.
Recommendations for optimal placement of smoke detectors in a home.
Recommendations for optimal placement of carbon monoxide detectors.
Details the rights granted for installing and using the software product.
Specifies restrictions on reverse engineering, decompilation, and component separation.
Outlines the terms and conditions of the software's limited warranty.
Discusses various reasons why an alarm system might fail to provide protection.
Information on FCC rules, modular jacks, and Ringer Equivalence Number (REN).
Technical specifications and compliance statements for Industry Canada.
General warnings applicable when connecting equipment to the New Zealand Telecom Network.
Information on decadic signalling and line grabbing equipment.
General| Model | SCW9057-433 |
|---|---|
| Type | Wireless Security System |
| Category | Security System |
| Frequency | 433 MHz |
| Installation | DIY or professional installation |
| Battery Life | Up to 24 hours (backup battery) |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Warranty | 1 year |
To Next Page
