To Next PageTo Next Page
Need help?Do you have a question about the Impax IM-MIG120 and is the answer not in the manual?
Specifies the product or equipment covered by the declaration.
Lists standards to which product conformity is declared.
Identifies the individual responsible for the technical documentation.
Provides contact details for customer support and spare parts.
Explains safety alert symbols (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Provides essential pre-operation safety guidance and important user advice.
Covers safety precautions for the welding environment and general practices.
Details hazards and safety measures related to electrical components and connections.
Outlines steps to prevent electric shock during operation.
Explains the importance and methods of proper equipment grounding.
Covers safe handling and maintenance of welding accessories and connections.
Provides safety instructions for equipment with and without output control.
Details safe practices for changing electrodes and using safety devices.
Covers equipment inspection and warnings related to welding fumes and gases.
Addresses hazards in confined areas, noise protection, and fire prevention measures.
Details dangers associated with batteries, flying sparks, hot coolant, and unit falls.
Warns about eye and skin damage from optical radiation and arc rays.
Provides a guide for selecting appropriate protective filter shades for welding.
Covers interference from HF radiation and hazards from electric/magnetic fields.
Addresses safety for powered equipment, hot parts, fire, static, and overheating.
Provides detailed safety guidelines for specific situations and outdoor use.
Covers safety for the workspace, electrical connections, and personal protection.
Details precautions against accidental starts and proper attire.
Provides instructions for using, maintaining, and servicing the power tool.
Covers installation requirements for environment, location, tilting, and ventilation.
Details procedures for grounding and protecting against high-frequency interference.
Explains how to connect the power input and provides a wiring diagram.
Covers plug types, fuse ratings, and detailed technical specifications.
Lists and identifies all parts included with the welding machine.
Details connecting output cables and setting up for MMA welding.
Step-by-step guide for setting up MIG welding with shielding gas.
Step-by-step guide for setting up MIG welding without shielding gas.
Instructions for connecting and preparing for TIG welding.
Covers general assembly, face mask setup, and welding wire installation.
Details wire prep, power connection, and selecting the MIG welding mode.
Covers setting amperage, attaching gas, and installing welding wire.
Details torch handling, contact tip fitting, and wire diameter selection.
Covers user experience, workpiece cleaning, and powering on the welder.
Details material prep, common welding problems, and wire feed adjustment.
Provides welding tips, electrode details, and thermostatic protection information.
Addresses problems like porosity, wire feed, no operation, and low output current.
Covers problems like burn through, poor fusion, and irregular weld bead shape.
Details MMA description, electrode selection, and operational safety.
Covers amperage setting, electrode chart, safety warnings, and overheat indicator.
Details job inspection, material prep, the MMA process, and electrode types.
Describes cellulosic, rutile, basic electrodes and their care/storage.
Covers electrode drying procedures and thermostatic protection (duty cycle).
Addresses common MMA problems like spatter, penetration, and porosity.
Covers TIG operation, gas setup, and electrode current ranges.
Details methods for starting the arc and TIG welding fusion techniques.
Explains filler wire usage and provides basic GTAW and DC TIG welding guides.
Covers filler wire diameter selection and DC welding polarity (EN/EP).
Provides details on Thoriated, Ceriated, and Zirconiated tungsten electrodes.
Summarizes electrode types and provides a welding rate table.
Addresses problems with bead width, penetration, and fillet leg length.
Covers issues with weld pool, arc start, fluttering, and connections.
Details regular maintenance tasks and care for the welding mask.
Addresses problems like no display, fan not working, no output, and trigger issues.
Covers erratic output, fuse problems, and environmental protection/disposal.
Explains various symbols and provides technical data definitions.
Illustrates and explains CE, UKCA, RoHS, and general warning symbols.
Specifies the product or equipment covered by the EU declaration.
Lists harmonised standards for EU conformity.
Identifies the individual responsible for the EU technical documentation.
General| Brand | Impax |
|---|---|
| Model | IM-MIG120 |
| Category | Welding System |
| Language | English |
