9
the transmitter will automatically search for the last
known Bluetooth device connected during the last
operation. This mode is displayed through a slow
ash of the green status LED on top of the BAT 2
(LED ashes 2 times per sec.).
Has a Bluetooth connection been established suc-
cessfully, the BAT 2’s status LED is permanently
illuminated blue, Bluetooth transmission starts au-
tomatically.
4.2 Terminate connection
In order to terminate an established Bluetooth con-
nection, you can either deactivate Bluetooth mode
on the connected device or press the button on top
of the BAT 2. The connection is terminated and the
BAT 2 switches to connection mode (rst connec-
tion mode “memory” and after 40 seconds without
connection to connection mode “new”).
4.3 Standby mode
If the BAT 2 doesn’t nd a device to be connected
within 60 seconds, the transmitter automatically
switches to standby mode (green status LED a-
shes extremely slow, only twice every 5 seconds).
E
To Next Page
Loading...
