Impossible INSTANT LAB

To Next Page

Download and install the free

Impossible Project App to

your iPhone

or iPod Touch

Search for ‘Impossible

Project’ in the App Store

simply scan the QR code to

the far top right.

Slide the lm door latch to

open the lm door. Push the

lm cassette all the way in.

Close the lm door.

Note Please check lm pack-

aging for development time,

handling and storage details.

Press and hold the eject

button for 1 second to eject

the lm darkslide.

Note Eject the darkslide only

once each time after inserting

a new lm pack.

GETTING READY

Pull the tower up until all

5 sections of the tower have

clicked rmly into place.

Remove the cradle cover

that’s protecting the lens.

Launch the Impossible

Project App on your iPhone.

Choose ‘Instant Lab’ from

the menu and follow the

instructions on the screen to

choose and edit your image.

When ready, place your iPhone

on the cradle with the screen

facing down. Once in the cra-

dle, the iPhone ash will turn

on. Within 3seconds, pull the

shutter slide all the way out.

Note iPod devices will sound

an alert instead of the ash.

After the ash goes off,

push the shutter slide back

in. Once the shutter slide

is back in, you can safely

remove your iPhone.

Press the eject button to

eject your instant photo.

Shield your photo from light

during development! See lm

packaging for details.

USING THE INSTANT LAB DONE!

THE INSTANT LAB

QUIck START

We know you are anxious to start

using your Instant Lab, but please

take a moment to read these brief

instructions before you begin.

Remove your iPhone and

replace the cradle cover

toprotect the lens. Press tabs

on either side of each tower

section to collapse the tower.

1 2 3 4 5 6 7 8 9

IMP.338 IL Quickstart Manual RZ.indd 1-3 17.06.13 16:46

Need help?

Do you have a question about the Impossible INSTANT LAB and is the answer not in the manual?

Summary

Getting Ready

Download and Install App

Download and install the free Impossible Project App to your iPhone or iPod Touch.

Load Film Cassette

Slide the film door latch to open. Push the film cassette in and close the door.

Eject Film Darkslide

Press and hold the eject button for 1 second to eject the film darkslide.

Using the Instant Lab

Prepare the Tower

Pull the tower up until all 5 sections click into place. Remove the cradle cover.

Launch App and Edit Image

Launch the Impossible Project App and follow on-screen instructions to choose and edit your image.

Position iPhone and Shoot

Place iPhone on cradle, screen down. Pull shutter slide out within 3 seconds after flash.

Retrieve Photo and Develop

Push shutter slide back in. Remove iPhone. Press eject button to eject photo. Shield from light.

Finalize and Store

Remove iPhone and replace cradle cover. Collapse tower by pressing tabs on tower sections.