This document describes the Improvements 26lb Bullet Countertop Ice Maker (Mod: 855713), a portable ice maker designed for household use.
Function Description
The ice maker is designed to produce up to 26 lbs of bullet-shaped ice cubes over a 24-hour period. It features a self-clean function for easy maintenance. The device operates by filling a water tank with drinking water, which is then used to form and freeze ice cubes. Users can select between two ice cube sizes: large or small. The ice maker is not a freezer unit; produced ice needs to be used promptly or transferred to a freezer for longer storage.
Important Technical Specifications
- Model: 855713
- Applicable Climate Types: SN/N/ST
- Grade of protection against electric shock: I
- Ice storage capacity: 400g
- Water tank volume: 1.0L
- Rated voltage/frequency: 110-120V/60Hz
- Rated current: 1.8 A
- Refrigerant/Weight: R600a/0.81oz
- Net weight: 14.7lbs
- Product size: 10.63(L)×8.86(W)×11.42(H) inches
- Operating Temperature Range: 50°F to 100°F (ambient)
- Recommended Water Temperature: 45°F-90°F
Usage Features
The ice maker is controlled via a top-mounted control panel with several LED indicators and buttons:
- ON/OFF/CLEAN Button (A): Turns the ice maker ON/OFF or initiates the CLEAN cycle.
- POWER LED (B): Indicates that the ice maker has power and is ready for use. Flashes green in standby mode.
- SELECT Button (C): Allows selection between LARGE or SMALL ice cube sizes.
- ICEFULL LED (D): Illuminates red when the ice collection basket is full, signaling it needs emptying.
- ADD WATER LED (E): Illuminates red when the water tank requires refilling.
- SMALL LED (F): Indicates the ice maker is set to produce small ice cubes.
- LARGE LED (G): Indicates the ice maker is set to produce large ice cubes.
Preparation for Use:
- Allow the ice maker to sit upright on a flat surface for 24 hours before first use to allow the refrigerant to settle.
- Place the unit on a stable, level surface with at least 6 inches of space around it for proper ventilation.
- Plug into a 120V mains socket. The POWER LED will flash green, and the LARGE ice cube size LED will illuminate green.
- Open the top cover, remove the ice basket, and fill the water tank with drinking water up to the MAX level. Filtered or purified water is recommended to minimize cleaning frequency.
- Replace the ice basket and close the top cover.
- Press the ON/OFF/CLEAN button once to start ice production. The SMALL ice cube LED will illuminate green, indicating small ice cubes are being made.
- To pause operation, press ON/OFF/CLEAN once. The POWER LED will flash green, indicating standby mode.
- To turn off the ice maker, press ON/OFF/CLEAN once when in ON mode, then unplug from the power supply.
Changing Ice Cube Size:
- While in operation, press the SELECT button to toggle between LARGE and SMALL ice cube sizes. The corresponding LED will illuminate.
- The ice maker has a power-off memory function, retaining the last selected ice size setting.
Refilling Water:
- When the "ADD WATER" LED lights up red, the water tank is empty. Refill to the MAX level and press ON/OFF/CLEAN to restart.
Emptying Ice Basket:
- When the "ICE FULL" LED lights up red, the ice basket is full. Open the front panel and remove the basket or use the provided scoop to empty it.
Maintenance Features
- Self-Clean Program:
- Fill the water tank with clean water (diluted vinegar/detergent/citric acid (1:10) can be used).
- In standby mode, press and hold the ON/OFF/CLEAN button for 5 seconds to activate the 15-minute self-clean program.
- After the cycle, hold the unit over a basin and remove the drainage plug to drain the water. Allow the unit to dry.
- It is recommended to run the self-clean cycle once per week if using daily.
- Manual Cleaning:
- Always unplug the machine from the power supply before manual cleaning.
- Clean the interior with a soft wet cloth and dry thoroughly.
- Clean the exterior with a soft cloth and mild cleaning detergents. Avoid abrasive materials.
- The removable ice basket and scoop are dishwasher safe.
- Never use hot water for cleaning, as it may damage internal workings.
- If storing for a long period, empty the water tank and ensure the drainage plug is securely fitted when reusing.
- Initial Use Recommendation: Before first consumption of ice, it is recommended to run 4 cycles of ice production and discard the ice to ensure all internal components are clean.
Accessories
The ice maker comes with:
- Removable ice Basket
- Ice Scoop
- Suction Cup (for holding the ice scoop)
Safety Precautions
- Do not plug/unplug with wet hands.
- Do not attempt to repair or replace parts unless guided by the manufacturer or a skilled technician.
- Ensure proper ventilation (at least 6 inches clearance).
- Designed for indoor use only, away from high-temperature sources, wind, rain, or electromagnetic environments.
- Do not squeeze or twist the power cord.
- Ensure the base is flat and secure; do not incline more than 45 degrees.
- Use only drinking water.
- Never touch the evaporator by hand when the machine is working.
- Do not use mechanical means to accelerate defrosting.
- Do not clean with flammable liquids.
- Do not store explosives or flammable gases/liquids in the appliance.
Troubleshooting
- No power: Check power supply, power cord for damage.
- "ADD WATER" indicator on: Add water and restart.
- "ICE FULL" indicator on: Empty the ice basket.
- Ice cubes sticking together: Replace water; ensure water temperature is within 45°F-90°F.
- Ice cubes smaller than usual: Replace water; ensure water temperature is within 45°F-90°F.
- Machine working but not making ice: Could indicate refrigeration pipe blockage or refrigerant leak. Stop use and call authorized technician.