Impulse SLA Series User Manual

© Impulse 2006
26
Slave/Master Switch (SLA-600 / SLA-1000)
-Slave mode : To be switched "Slave mode" when linking one amplier with
another amplier.
-Master mode : To be switched " Master mode" when only using this single
amplier.
SUBSONIC (SLA-600 / SLA-1000)
Frequency adjustment control for the subsonic lter adjustable 10Hz to
50Hz.
PHASE (SLA-600 / SLA-1000)
In many car audio systems placement of the subwoofers can cause them to
be out of phase with the rest of the system. This may cause poor subwoo-
fer performance due to varying arrival times. To eliminate this the incorpo-
rates 0 ~ 180 phase variable. By playing low frequency music and experi-
menting with the subwoofer phasing better sound quality and bass imaging
may be obtained.
BASS-EQ
The variable Bass-Boost function increases the sound at 45Hz/0-18dB.
LPF (SLA-600 / SLA-1000)
Frequency adjustment control for the LPF lter adjustable 30Hz to 250Hz.
HP (SLA-2100 / SLA-4500)
When the push switch is "ON", the High-Pass corssover is active.
The High-Pass crossover is continuously variable from 50Hz to 500Hz.
LP (SLA-2100 / SLA-4500)
When the push switch is "ON", the Low-Pass corssover is active.
The Low-Pass crossover is continuously variable from 50Hz to 500Hz.

Impulse SLA Series Specifications

General

Brand	Impulse
Model	SLA Series
Category	Amplifier
Language	English