Need help?Do you have a question about the IN HOUSE LED Driver Dimmable 0/10V Push and is the answer not in the manual?
General| Power Factor | >0.9 |
|---|---|
| Efficiency | >85% |
| Operating Temperature | -20°C to +50°C |
| IP Rating | IP20 |
| Output Voltage | 12-24V DC |
| Dimming | 0-10V, Push Dim |
| Protection | Short Circuit, Overload, Over Temperature |
Details on input voltage, frequency, and current consumption for the driver.
Defines output voltage, current/voltage ranges, and power output (W).
Outlines built-in protections like short circuit and overheat with auto-reset.
Specifies dimming method (0/1-10V, Push-Dim) and physical dimensions (WxDxH).
States the Ingress Protection (IP20) and product guarantee period (3 years).
Highlights essential features such as flicker-free operation, low standby power, and dimming memory.
Instructions for setting DIP switches to configure the output current of the driver.
Diagram and explanation for connecting luminaires using primary push dimming.
Diagram and explanation for connecting luminaires using secondary push dimming.
Details on connecting the 1-10V interface and how the signal affects driver behavior.
Procedure to synchronize multiple drivers by pressing and holding the button for 15 seconds.
Precautions regarding lightning, magnetic fields, correct connections, and live cables.
Guidelines on ventilation, voltage checks, avoiding opening the unit, and proper use.
States the device is intended for adults and for use in accordance with instructions.
Notes on supervision for users with limited capabilities and child safety measures.
Warnings against water immersion, damaged cables, bending, and unauthorized repairs.
Advice on using only recommended accessories, ensuring dry hands, and proper cleaning.
Check for damage upon unpacking and contact dealer if issues are found.
Steps to resolve issues like the product not working or plug problems.
Details on push switch timing for ON/OFF and dimming, and reset procedures.
Information about the recyclability of the product packaging.
Guidance on proper disposal of the device in accordance with regulations.
To Next Page