Cleaning & Maintenance
1. Always unplug the appliance from the electrical outlet before cleaning. Clean the outer
body and attachments with damp cloth.
2. To open the dust container, press push button and pull out the dust container.
3. Remove the dust-bag filter and empty the dust from it.
4. Rinse the dust-bag in water then wait until it dries up before replacing it into the dust
container.
6. Place the dust-bag filter carefully into the dust container and attach container to the vacuum
cleaner.
7. To take off the motor protection filter of air input(from suction side) for washing when it is
dirty, push button to release the dust container, take out sponge and wash gently and place it
back.
8. To take off the blower outlet filter of air output (from blower side) for washing when it is
dirty, pull the blowing outlet to take out sponge to wash gently, then place it back.
Safety Feature
This vacuum cleaner is provided with "Overload Protection". In case the motor gets
overheated, this protector will automatically stop the motor till the temperature is normal. In
such situation, switch off the unit and restart after 10 min.
For better performance, use this vacuum cleaner for 15 min and then give 3 min break so that
the motor does not heat up.
Warning : Vacuum and blower must be used one at a time and not together.
6
To Next Page