inalto.house 17
CLEANING THE DRAIN PUMP FILTER (NOT APPLICABLE FOR MODEL ITLW55W)
WARNING!
• Be careful of the hot water!
• Allow detergent solution to cool down.
• Unplug the machine to avoid electrical shock before washing.
• Drain pump lter can lter the yarns and small foreign matters from the washing.
• Clean the lter periodically to ensure the normal operation of washing machine.
CAUTION!
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be
inserted aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, so step 2 and step 3 can be skipped.
Rotate lower cover cap directly to make water run into basin.
• When the appliance is in use and depending on the program selected there can be hot water in
the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has
nished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.
Drain the water out
of the pump, using a
container to collect
Clean the lter
Open the lter by turning
to the counter clockwise
Restore it and adjust the
convex place to align at the
pump hole
Remove foreign objects
Tighten the pump
cover clockwise
To Next Page
Loading...