Inanny Roomie30 - User Manual

Questions and Answers

S
scottmasonAug 8, 2025
Why is the signal weak on my Inanny Roomie30 Baby Monitor?
- S
  Stephanie BanksAug 8, 2025
  If you're experiencing a weak signal, frequent disconnections, or interference with your Inanny Baby Monitor, try these steps: * If there's a microwave or other electronic device between the camera and parent unit, remove it or turn it off. * Check for obstructions like trees between the camera and parent unit; reposition the devices for a better connection. * Ensure the camera and parent unit are close enough together. Move them closer to improve signal strength.
S
Samantha StarkAug 12, 2025
What to do if my Inanny Baby Monitor is beeping?
- S
  Steven StewartAug 12, 2025
  If you're hearing an acoustic signal from the parent unit of your Inanny Baby Monitor, consider the following: * Make sure the parent unit isn't too far from the camera. Move them closer together. * Verify that the camera's mains part plug is correctly connected. * Ensure the camera is switched on. * Check if the parent unit’s battery needs charging.
A
avazquezAug 15, 2025
How to fix Inanny Roomie30 that will not turn on?
- T
  Traci ClarkAug 16, 2025
  If the parent unit of your Inanny Baby Monitor won't switch on, check: * If the mains part plug is correctly connected. * If the battery is fully charged, needs charging, or is damaged.
K
Kathryn SwansonAug 20, 2025
Why is my Inanny Roomie30 Baby Monitor on but has no sound?
- P
  Paul AndersonAug 20, 2025
  If your Inanny Baby Monitor's parent unit is on but silent, ensure the volume is turned up. Press the up or down arrow buttons in monitor mode to adjust the volume to your desired level.
B
Brandon Baker MDAug 25, 2025
How to pair Inanny Baby Monitor?
- J
  John AdkinsAug 25, 2025
  If you're unable to get a transmission on your Inanny Baby Monitor, you can try re-pairing the devices: 1. Switch on the camera and parent unit. 2. Pair the camera again as described in the “Add camera” section. If there is no free camera location, delete a location first, as described in the “Delete camera” section.
J
Jessica ArnoldAug 29, 2025
Why does my Inanny Roomie30 Baby Monitor turn off by itself?
- L
  Lacey ScottAug 29, 2025
  If the parent unit of your Inanny Baby Monitor is switching off automatically, it might be in standby mode. Check if the video on timer mode has been selected in the menu and deactivate it if necessary.
E
Erica CastroSep 2, 2025
How to turn on Inanny Baby Monitor from standby?
- R
  Reginald KelleySep 2, 2025
  To turn on the screen of the Inanny Baby Monitor parent unit when it is in standby mode, briefly press the on/off button.