3
2. Automatically Pairing with Previously
Paired Devices
BR1003 will enter pairing mode
automatically when powered on for
the first time. BR1003 can remember
previously paired devices and
will attempt to pair with devices
automatically, without going into
pairing mode.
3. Quick Pairing
Quickly double-click the Multifunction
Button to enter pairing mode after the
BR1003 is powered on.
4. TX/RX Mode Switch
RX/TX mode can only be successfully
switched after the adapter is turned o
for 5 seconds.
Note: Turn off the BR1003 and restart
it after 5 seconds if the mode switch is
not functioning properly.
5. Clear Pairing History
Please follow the guides below to clear
the pairing history if pairing failures are
encountered:
1) Turn off the BR1003, switch TX (RX) mode
to RX (TX) mode after 5 seconds, and then
restart the BR1003.
2) Turn o the BR1003, switch RX (TX) mode to
TX (RX) mode after 5 seconds.
After that, the pairing history of TX (RX)
mode will be cleared.
To Next Page
Loading...
