3
Package Contents
FD2102 Docking Station × 1
USB 3.0 Data Cable × 1
DC Power Adapter × 1
Instruction Manual × 1
Product Name USB3.0 Dual SATA HDD Docking Station with Offline Clone
Function
Model Number Inateck FD2102
Weight 356g
Color Silver-gray
Drive Size 2.5”/3.5” SATA I/II/III HDD/SSD
Interface USB3.0 - Up to 5Gbps
Material Aluminum Alloy and ABS plastic
Hot Plug, Plug & Play Supported
Licenses CE, FCC
Measurements 130mm length × 115mm width × 62mm height
Environmental Storage: -20 to 70 ° C; Operating: 5 to 40 ° C
Operating Systems Windows XP/7/8/8.1/10, Mac OS 9.0 and higher
Tool free Yes
Driver No software or drivers required
Technical Specications
Troubleshooting/FAQ
Q: I cannot start the oine clone.
A: Please check if the capacity of Disk B is larger or equivalent to that
of Disk A. Here the capacity means the actual capacity that can be
used, instead of the one marked on the product. For example, the
actual capacity of a disk marked 500GB might be 480GB only. The
actual capacity of disks with the same marked capacity diers if they
are produced by different producers. To ensure two disks of the
same marked capacity have the same actual capacity, they should
be produced by the same producer in the same batch with the same
model number.
To Next Page
Loading...