Inbike 528 User Manual

INBIKE 528 Bike Computer Instruction
Fuctions

SPD
Speed

ODO Total cycling distance

DST
One-pass cycling distance

MXSMaximum speed

AVSAverage speed

TMOne-pass cycling time

CLK
Clock

SCANAutomatic Cycleplay

BACKLIGHT

SW Stop-watch

CDDCount-down distance

CDTCount-down time

CALConsumed calorie

FATConsumed fat

TEMTemperture

Alter For power shortage
Power saving

‘+’& ‘-‘ Speed comparing

Upkeep reminding

KM/hr M/hr setting

Wheel perimeter setting

Total distance initial value setting

Cycling date sampling

Automotive wake-up
 Installation of Battery
Open the battery lid with a coin. Put in a 3V CR2032 Battery. ( Positive pole upwards)
 Installation of inductor & Magnet
Install the Inductor on the front fork ( Same side as the magnet),Fix the inductor with the
complimentary armor tape, twine the wire on the handlebar.(Fix with armor
tape) ,Adjust the position between the magnet and inductor, make the distance around
1.5mm.(The closer ,the Better) .When fix the magnet, never let the magnet towards the
centre of inductor, make the magnet towards to the upside or downside of the inductor.
 Installation of the computer base
Fix with the armor tape

Inbike 528 Specifications

General

Product Type	Bicycle Light
Model	528
Material	Aluminum Alloy
Waterproof	IPX6
Battery Capacity	2000mAh
Mounting Placement	Handlebar
Power Supply	Battery
Modes	High, Medium, Low

Summary

Bike Computer Functions

Speed and Distance Functions

Covers speed, total distance, one-pass distance, max speed, and average speed metrics.

Installation Guide

Battery Installation

Instructions for opening the battery lid and inserting the 3V CR2032 battery correctly.

Inductor and Magnet Setup

Guidance on installing the inductor on the fork and positioning the magnet for accurate readings.

Computer Base Mounting

Parameter Settings

Computer Installation

Procedure for attaching the computer to its base, including rotation.

Wheel Perimeter Setting

How to record wheel size and set the accurate perimeter for distance measurement.

Speed Unit Selection

Detailed Function Operations

Clock Setting

How to set the clock time and choose between 12/24 hour format.

Total Cycling Distance (ODO)

Setting the initial odometer reading and its importance after battery changes.

System Operations and Troubleshooting

Resetting Functions

How to reset distance unit, wheel perimeter, weight, and upkeep reminders.

Low Battery Warning

What the battery symbol indicates and when to change the battery.

Malfunction and Reasons

Table listing common malfunctions and their potential causes.