Need help?Do you have a question about the inbody BAND 2 and is the answer not in the manual?
General| Brand | inbody |
|---|---|
| Model | BAND 2 |
| Category | Fitness Trackers |
| Language | English |
Identifies and illustrates the physical parts included with the InBody BAND 2 device.
Charge the InBody BAND 2 by connecting it to the included charging cable and plugging into a USB port.
To power on, place the InBody BAND 2 on your wrist and hold the upper and lower electrodes for three seconds.
Wake the screen by pressing both electrodes or raising your wrist with 'Auto View' enabled.
Flip through displays by tapping the screen or touching both electrodes simultaneously.
Download the InBody Wear app and sync your device for data transfer, including InBody Test, heart rate, steps, and sleep data.
Perform InBody Test measurements using the InBody Wear app by inputting weight and following on-screen prompts.
Conduct InBody Test measurements directly on the device by holding electrodes until the test icon blinks.
Wear the InBody BAND 2 during activities; it automatically measures and syncs step data to the app.
Set an alarm to vibrate if no walking is detected during a specified time period.
Enable Goal Alarm to set daily step or calorie targets and receive notifications.
Set custom alarms for specific times and days with repeat options.
Get alerts if the device is not worn for a set duration.
Select which app notifications (Call, SMS, etc.) you want to receive on the device.
Defines criteria for complementary service based on manufacturer or natural defects within the warranty period.
Details compensation options for product defects within and after the warranty period.
Outlines the warranty duration, purchase date confirmation, and specific terms.
To Next Page
