inbro IB-RSC1201 - User Manual

Provides critical safety warnings for operating the machine, including physical injury and electrical shock hazards.

Details electrical input power, voltage range, power consumption, and insulation resistance.

Detailed instructions and diagrams for threading the upper thread through various machine parts.

Explains how to adjust the upper thread tension for optimal embroidery quality.

Procedure for placing the bobbin and threading the lower thread correctly.

Instructions on how to adjust the lower thread tension using the tension spring screw.

Procedures for adjusting the relative position of the needle and hook for proper stitch formation.

Instructions on how to adjust the timing between the needle and the hook for optimal stitch formation.

Illustrates points requiring oil and specifies the frequency for oil supply.

Procedure for adjusting the hook's position and ensuring correct alignment with the needle plate.

Steps for adjusting the upper and lower dead points of the needle and hook.

Procedure for adjusting the encoder position to ensure accurate machine angle and speed sensing.

Procedures for adjusting the tension of the main, X-axis, and Y-axis drive belts.

Instructions for setting up the position and angle of the thread sensor system.

Troubleshooting common errors related to the main motor belt, emergency switch, and input power.