Inca RM-42 User Manual

Check polarity of battery contacts,
this Universal Charger automatically
detects ‘+’ or ‘-’ polarity
IMPORTANT
Contact pins must only connect
with ‘+’ and ‘-’ contacts on battery
Picture 1.
Picture 2.
universal
charger
CHARGES
LI-ION BATTERIES
AND USB DEVICES
745453 RM-42
Picture 3.
Picture 4.
www.inca.net.au
Press to unlock
Straighten
up battery
Slide forward to
secure battery
Adjust pins to + & - of battery
Slide cover open to lock
Place battery in position & connect pins to + & -
The manufacturer does not accept responsibility for any personal
loss and/or injury if the defect was caused by misuse or
mishandling by the user in anyway.
Batteries shown not included
AC power
110V-240V
from mains
12V Car Adaptor
from vehicles
INPUT
Charges USB
devices
OUTPUT
side1

Inca RM-42 Specifications

General

Brand	Inca
Model	RM-42
Category	Battery Charger
Language	English

Summary

Operating and Safety Instructions

Re-Charging a Li-ion Battery Pack

Instructions for charging Lithium-ion battery packs, including pin adjustment and connection.

Re-Charging a USB Device

Instructions for charging USB electronic devices via the charger's output port.

Important Safety Instructions

Usage and Handling Precautions

Guidance on charger use, environmental conditions, child safety, ventilation, and contact maintenance.