Inca RM-43 User Manual

Picture 1.
UNIVERSAL
charger
UNIVERSAL LITHIUM (LI-ION)
AA & AAA NI-MH/NI-CAD BATTERY
AND USB DEVICE CHARGER
www.inca.net.au
745454 RM-43
AC power
110V-240V
from mains
12V Car Adaptor
from vehicles
USB power 5V
from USB devices
Charges USB
devices
Check polarity of battery contacts.
This Universal Charger automatically
detects ‘+’ or ‘-’ polarity
IMPORTANT
Contact pins must only connect
with ‘+’ and ‘-’ contacts on battery
Press to unlock
Straighten
up battery
Slide forward to
secure battery
Slide cover open
Place battery in position
Slide cover open
Place battery
in position
Picture 2.
Picture 3.
Picture 4.
Picture 5.
INPUTOUTPUT
Batteries shown not included
Adjust pins to + & - of battery
side 1

Inca RM-43 Specifications

General

Brand	Inca
Model	RM-43
Category	Battery Charger
Language	English

Summary

Operating and Safety Instructions

Re-Charging a Li-ion Battery Pack

Instructions for inserting and charging Lithium-ion battery packs, including polarity adjustment and securing.

Re-Charging AA/AAA Batteries

Guidelines for inserting and charging AA/AAA Ni-MH/Ni-Cad batteries, emphasizing correct polarity and matching capacity.

Re-Charging a USB Device

Procedure for charging external USB devices using the charger's output port, noting power source requirements.

Important Safety Instructions

Critical warnings and precautions for safe operation, including battery compatibility, heat, water, and handling.