Incon TS-550 evo User Manual

TS-550/5000 evo
®
Fuel Management System
Installation Guide
Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA
Tel: +1 608 838 8786 • 800 225 9787 • Fax: +1 608 838 6433 • www.franklinfueling.com
Manual # Revision Date Changes from Previous Revision
000-2170 D June 2019 Added new control drawings 000-1722_015_01_1814098 and
000-1722_015_02_1446163

Incon TS-550 evo Specifications

General

Model	TS-550 evo
Category	Server
Network	2 x Gigabit Ethernet
Form Factor	Tower
Processor	Intel Xeon E3-1200 v5/v6
Memory	Up to 64GB DDR4 ECC
Storage	Up to 4x 3.5" SATA/SAS HDD/SSD
RAID	Optional RAID 0/1/5/10 with dedicated RAID controller
Operating System	Supports Windows Server, Linux

Summary

Important Safety Messages

Contacting Franklin Fueling Systems

Introduction

Certified Installer/Service Person

Defines who is allowed to access the user interface keypad and internal console areas.

Station Owner/Operator

Specifies that owners/operators can only access the user interface keypad, not internal console areas.

Abbreviations & Acronyms

Lists and defines technical terms and acronyms used in the manual for the TS-550/5000 evo system.

Related Documentation

References other documents providing detailed instructions for system operation, troubleshooting, and maintenance.

Product Description

Overview of the TS-550/5000 evo as a modular, automatic, continuous monitoring system with plug-in modules.

Standard Installation Materials

Console Installation

Console Location

Guidance on selecting an indoor, non-hazardous location for console installation, considering operator convenience and environment.

Mounting the Console

Instructions and warnings for securely mounting the console, considering ventilation and weight support.

TS-550/5000 evo Dimensions and Operating Parameters

Communication Ports

RS-232 Communication Connectors

Details the pin designations for the two RS-232 serial communication ports on the TS-550/5000 evo console.

Wiring the Console & Modules

Non-Intrinsically Safe Module Wiring

Guidance on wiring non-intrinsically safe modules, emphasizing separation from intrinsically safe wiring and module placement.

Controller Module (CM)

Power Supply Module (PS)

Relay Output Wiring (optional)

Relay Module (RLY)

AC Input Module (ACI)

Input/Output Module (IO)

10 Amp Relay Module (10ARLY)

4-20mA EXP Analog Input Module (420EXP)

Intrinsically Safe Module Wiring

Probe Module (PRB)

2-Wire Sensor Module (2WSNS)

3-Wire Sensor Module (3WSNS)

4-20mA Analog Input Module (420IB)

Control Drawing

Warranty

Warranty Registration

Instruction to return the Warranty Registration form to validate the system warranty.

Specifications