IncrediBuilds GHOSTBUSTERS ECTOMOBILE - User Manual

INCREDIBUILDS™ COPYRIGHT © INSIGHT EDITIONS, LP, 2017.
WARNING: CHOKING HAZARD -
CONTAINS SMALL PARTS.
NOT FOR CHILDREN UNDER 3 YRS.
Manufactured in Shaoguan, China 060116
SANTA CLAUS
READ BEFORE ASSEMBLING:
• Go through the instructions one step at a time.
• Don’t punch out all of the pre-cut parts at once.
• Plywood thickness and color may vary.
• While not necessary, glue may be applied if desired.
• If you have trouble punching out the small pieces from
the board, use tweezers or a toothpick to help.
• Adult supervision recommended.
9
17
25
38 42
1
5
13
21
34
31
46 47
29
48 49
11
19
27
40 44
32
3
7
15
23
36
30
10
18
26
39 43
2
6
14
22
35
12
20
28
41 45
33
4
8
16
24
37
A-6
A-7
A-8
A-9
B-17
B-18
B-19
B-23
B-24
B-25
B-26
B-20
A-21
A-22
A-10
A-11
A-12
B-13
B-14
B-15
B-16
B-27
B-28
B-29
A-33
B-30
A-32
B-31
B-34
A-35
A-39
A-38
A-37
A-36
A-40
A-41
A-42
A-43
A-44
A-45
A-48
A-47
A-46
A-49
A-50
A-51
A-52
A-53
A-54
A-55
A-56
A-57
A-58
A-59
A-60
B-61
B-62
WARNING: CHOKING HAZARD -
CONTAINS SMALL PARTS.
NOT FOR CHILDREN UNDER 3 YRS.
Manufactured in Shaoguan, China ECT032719
GHOSTBUSTERS ™ & © 2019 COLUMBIA PICTURES INDUSTRIES, INC. ALL RIGHTS RESERVED
A-1
A-4
A-5
A-2
A-3
Pop out only these puzzle
pieces from the board.
Continue assembling by
putting pieces together in
numerical order.
Line up the grooves on pieces 28
and 30 while attaching the slot on
piece 34 with the end of piece 5.
Look carefully at the
orientation of each piece
shown. To put the two
pieces together, match
up the slots on each
piece. Slide together.
BUILDING INSTRUCTIONS
ECTOMOBILE
READ BEFORE ASSEMBLING:
• Go through the instructions one step at a time.
• Don’t punch out all of the precut parts at once.
• Plywood thickness and color may vary.
• While not necessary, glue may be applied if desired.
• If you have trouble punching out the small pieces from
the board, use tweezers or a toothpick to help.
• Adult supervision recommended.
Find pieces 1 and 2 on
the board.
Carefully attach piece
4 so that piece 1 doesn’t
accidently break.
Line up the grooves on
pieces 17 and 19 while
attaching the slot on piece
23 with the end of piece 5.

Summary

Ectomobile Building Instructions: Preparation and Initial Assembly

Initial Frame Construction

Assemble the first four pieces by aligning slots and sliding them together.

Attaching Front Piece

Carefully attach piece 4 to the assembled frame to avoid breakage.

Continuing Assembly Sequence

Proceed with assembly by connecting pieces in numerical order as shown.

Groove Alignment for Body Panels

Line up grooves on pieces 17 and 19, then attach piece 23 to piece 5.

Chassis and Wheel Assembly

Assemble various chassis components and wheel structures.

Ectomobile Building Instructions: Advanced Assembly Stages

Detailed Chassis and Body Integration

Construct and integrate detailed chassis and body components.

Adding Exterior Details and Features

Assemble and attach various exterior elements and accessories.

Final Assembly and Finishing Touches

Complete the model by assembling the final components and ensuring proper fit.

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The provided document is a detailed building instruction manual for an "ECTOMOBILE," a model kit based on the Ghostbusters™ franchise. This suggests the device is a wooden, three-dimensional puzzle or model of the iconic Ecto-1 vehicle.

Function Description:

The ECTOMOBILE serves primarily as a decorative display model and a recreational building project. Its function is to allow enthusiasts to construct a detailed replica of the Ghostbusters' Ecto-1 car from pre-cut wooden pieces. The assembly process itself is a key part of its function, offering an engaging and intricate puzzle-solving experience. Once assembled, the model can be displayed as a collectible item, appealing to fans of the Ghostbusters series and model-building hobbyists. It does not appear to have any functional moving parts or electronic components, serving purely as a static display piece.

Important Technical Specifications:

• Material: The model is constructed from plywood, as indicated by the instruction "Plywood thickness and color may vary." This suggests the pieces are laser-cut from sheets of wood.
• Assembly Method: The primary assembly method involves interlocking pre-cut pieces. The instructions repeatedly mention "match up the slots on each piece," "slide together," and "line up the grooves." This indicates a slot-and-tab construction system, common in wooden 3D puzzles.
• Part Count: The manual illustrates 96 distinct assembly steps, each potentially involving multiple pieces. While an exact total part count is not provided, the sheer number of steps (from A-1 to B-137, with many intermediate parts) suggests a high level of detail and a significant number of individual components. The parts are labeled with alphanumeric codes (e.g., A-1, B-20), indicating different sheets or categories of pieces.
• Complexity: The model is highly intricate, as evidenced by the numerous small parts and detailed assembly steps. For example, steps 38 and 39 show the assembly of small wheel components, and steps 46 through 49 depict the complex layering of the vehicle's chassis. The warning "CONTAINS SMALL PARTS. NOT FOR CHILDREN UNDER 3 YRS." further underscores the intricate nature and small size of many components.
• Dimensions (Inferred): While specific dimensions are not given, the visual representation of the assembled vehicle suggests a substantial model, likely in a scale that allows for a high level of detail. The complexity of the chassis and roof-mounted equipment implies a significant physical presence once completed.
• Origin: The product is "Manufactured in Shaoguan, China," as stated on the first page.
• Licensing: The model is officially licensed, bearing the "GHOSTBUSTERS™ & © 2019 COLUMBIA PICTURES INDUSTRIES, INC. ALL RIGHTS RESERVED" mark.

Usage Features:

• Step-by-Step Instructions: The manual provides clear, visual, step-by-step instructions, with each step numbered and illustrated. This makes the complex assembly process manageable for users.
• Visual Guidance: Each step includes a detailed diagram showing the pieces involved and their correct orientation. For example, step 3 explicitly states, "Look carefully at the orientation of each piece shown."
• Part Identification: Pieces are clearly labeled in the diagrams with their corresponding alphanumeric codes (e.g., A-1, B-13). This aids in identifying the correct parts for each step.
• Sequential Assembly: The instructions emphasize sequential assembly: "Continue assembling by putting pieces together in numerical order." and "Don't punch out all of the precut parts at once." This prevents confusion and loss of parts.
• Interlocking Design: The primary usage feature is the interlocking nature of the pieces, which allows for assembly without the need for adhesives, although glue "may be applied if desired" for added stability.
• Gentle Handling Advisories: Several steps include specific warnings about gentle handling, such as "Carefully attach piece 4 so that piece 1 doesn't accidently break," "Be gentle when pushing down on piece 67," and "Be gentle when pushing down on piece 70." These advisories guide users to handle delicate parts appropriately.
• Tool Recommendations: For very small or stubborn pieces, the manual suggests using "tweezers or a toothpick to help," indicating that some parts may require fine manipulation.
• Adult Supervision: The recommendation for "Adult supervision recommended" highlights the intricate nature of the model and the potential for small parts, making it suitable for older children or adults.

Maintenance Features:

• No Active Maintenance: As a static wooden model, the ECTOMOBILE requires no active maintenance in terms of power, lubrication, or moving parts.
• Dusting: Like any display item, it would likely benefit from occasional dusting to maintain its appearance.
• Repairability: In case of accidental breakage, the use of glue is explicitly mentioned as an option ("While not necessary, glue may be applied if desired."), suggesting that minor repairs are possible with standard wood glue.
• Durability (Inferred): Plywood, when properly assembled and handled, offers reasonable durability for a static model. The interlocking design, especially if glued, would contribute to its structural integrity over time.
• Storage: The model, once assembled, would need to be stored in a stable environment, away from excessive humidity or extreme temperatures, to prevent warping or damage to the wood. The initial packaging, before assembly, would protect the flat sheets of pieces.

IncrediBuilds GHOSTBUSTERS ECTOMOBILE Specifications

General

Brand	IncrediBuilds
Model	GHOSTBUSTERS ECTOMOBILE
Category	Toy
Language	English