To Next PageTo Next Page
Need help?Do you have a question about the Incy Interiors Georgia Cot and is the answer not in the manual?
General| Type | Cot |
|---|---|
| Converts to | Toddler Bed |
| Finish | Non-toxic Paint |
| Convertible | Yes |
| Mattress Included | No |
| Assembly Required | Yes |
| Material | New Zealand Pine |
| Age Suitability | Newborn to Toddler |
| Age Range | 0-4 years |
Ensures mattress base is adjusted to the lowest position to prevent falls before the child can sit up.
Specifies the maximum mattress thickness to prevent falls.
Details the risks of entrapment and strangulation in toddler beds and how to prevent them.
Connect side (part A2) to headboards (part B) using bolts, spring washers, and washers.
Insert side rail (part A3) after the initial side attachment.
Fasten the side rail using bolts, spring washers, and washers.
Insert metal dowels into the cot mattress base sides.
Position the mattress base according to desired height levels and warning labels.
Place wooden dowels in unused mattress base level holes.
Attach the final side rail using bolts, washers, and spring washers.
Screw the four feet into the base of the cot.
Confirm all bolts are securely tightened before using the cot.
Position the mattress base on the lower level (Level 2) as instructed.
Lift and slide the side rail to adjust its position.
