Indel B TB41.2 - Fault Diagnosis; Error Code Reference

21
ONLY FOR SALES WITHIN THE EUROPEAN COMMUNITY EU
This appliance is marked according to the European Directive 2012/19 / EU (WEEE). The symbol
on the product indicates that this product should not be treated as household waste.
Ensure that this product is not entered as part of the flows of municipal waste but treated as
professional WEEE.
ENGLISH
FAULTS
ERROR
CODE
ERROR TYPE
E1
Battery protection or temperature sensor malfunction shutdown
(The voltage is outside the cut-out setting).
E2
Fan over-current cut-out
(The fan loads the electronic unit with more than 1A
peak
).
E3
Motor start error
(The rotor is blocked or the dierential pressure in the refrigeration system is too
high (>5 bar)).
E4
Minimum motor speed error
(If the refrigeration system is too heavily loaded, the motor cannot maintain
minimum speed 1,850 rpm).
E5
Thermal cut-out of electronic unit
(If the refrigeration system has been too heavily loaded, or if the ambient
temperature is high, the electronic unit will run too hot).
E6 Defective electronic unit
E7 Defective temperature sensor (open circuit or short circuit)