To Next PageTo Next Page
Need help?Do you have a question about the Indel Webasto Marine Isotherm 3135FA2B00000 and is the answer not in the manual?
General| Category | Refrigerator |
|---|---|
| Brand | Indel Webasto Marine |
| Model | Isotherm 3135FA2B00000 |
| Total Capacity | 130 liters |
| Gross Capacity | 130 liters |
| Energy Class | A+ |
| Voltage | 12/24 V DC |
| Shelves Material | Glass |
| Defrost System | Automatic |
| Installation | Built-In |
| Color | Stainless Steel |
| Cooling Method | Compressor |
| Type | Drawer Refrigerator |
Details the refrigeration box design, including top and side access, freezer compartment, and internal light.
Covers refrigerant handling, ventilation, battery connection, and proper disposal of the product.
Instructions on how to start and stop the compressor using the thermostat knob.
Guidance on adjusting the thermostat for optimal temperature and advice on storing food and bottles.
Recommendations for keeping the interior clean using mild detergent and lukewarm water.
Procedure for defrosting when frost exceeds 4mm, emphasizing safe methods and complete drying.
Advice on preparing the unit for extended periods of inactivity, including ventilation.
Guidance on checking air ventilation and accessing the compressor unit for potential service.
Details the automatic compressor cutoff levels to prevent deep battery discharge.
Lists common faults, their possible causes, and recommended actions for troubleshooting.
Provides key data including box volume, voltage, compressor type, refrigerant, and power consumption.
Illustrates the electrical connections for the battery, fan, and thermostat.
Lists available spare parts with their corresponding part numbers for replacement.
