To Next PageTo Next Page
Need help?Do you have a question about the Indesit BWSA 61253 and is the answer not in the manual?
General| Load Capacity | 6 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 85 x 59.5 x 42.5 cm |
| Noise Level (Wash) | 59 dB |
| Noise Level (Spin) | 77 dB |
| Loading Type | Front load |
| Spin-drying Efficiency Class | B |
| Noise Level Spinning | 77 dB |
| Noise Emission Class | C |
| Color | White |
Details removing packaging, transit screws, and ensuring the machine is level for stability.
Covers connecting the water inlet hose and essential electrical safety checks before plugging in.
Explains how to connect the drain hose to a drain duct or basin, ensuring correct height.
Covers safety checks before plugging into the socket, ensuring compliance with laws.
Instructions for running the initial wash cycle without laundry to clean internal parts.
Advises turning off the water tap and unplugging the machine for cleaning and maintenance.
Guides on cleaning the exterior, interior, pump, dispenser drawer, and checking the water inlet hose.
Recommends leaving the porthole door ajar to prevent unpleasant odours.
Covers domestic use, child safety, and general precautions for operating the appliance.
Explains load balancing for spin cycles and guidance on appliance disposal.
Identifies and explains buttons, indicators, standby mode, and their meanings on the control panel.
Provides instructions for both rapid and traditional programming of wash cycles.
Explains how to use the Push & Wash function for a quick, automatic cycle.
A comprehensive table listing all available wash cycles with their parameters and specifications.
Guides on adjusting wash temperature and spin speed for selected cycles.
Details features like Stain removal, Extra Rinse, and Easy iron for customising the wash.
Instructions on correctly dosing detergent and additives in the dispenser drawer.
Guidance on sorting, weighing laundry, and specific care for different garments.
Addresses issues with powering on, starting cycles, and water fill problems.
Solutions for problems with draining, spinning, vibration, and leaks.
Interpreting indicator lights, foam, and specific function failures.
Steps to take before calling technical support to resolve issues.
Details required when contacting technical support for service.
