Why Indesit DFG 015 won't start?
Your Indesit dishwasher might not be starting because the plug isn't properly inserted or there's no power. Also, check if the dishwasher door is completely shut. A delayed start might also be programmed.
What to do if no water drains out from Indesit DFG 015?
If water isn't draining from your Indesit dishwasher, first ensure the cycle has finished. Check the water inlet hose for bends and make sure the drain duct isn't blocked. Also, inspect the filter for food residues.
What to do if Indesit DFG 015 doesn't take in water?
If your Indesit dishwasher isn't taking in water and the Drying and End indicator lights are flashing, check if there's water in the mains supply and that the water inlet hose isn't bent. Turn on the tap; the appliance should start in a few minutes. If the appliance is locked due to inaction, switch it off and on, turn on the tap, and reprogram the machine.
What to do if crockery has not been dried properly in Indesit Dishwasher?
If your crockery isn't drying properly in your Indesit dishwasher, it could be because you selected a wash cycle without a drying program. Also, check if the rinse aid has been used up or the dosage is too low, or if the rinse aid dispenser setting isn't high enough.
What does it mean when the Drying indicator light flashes on Indesit DFG 015?
If the Drying indicator light flashes on your Indesit dishwasher, it indicates a water loading solenoid valve malfunction. Turn the appliance off and on. If the alarm continues, shut off the water tap, remove the plug, and contact Assistance.
What does it mean when the Washing, Drying and End indicator lights flashes on Indesit Dishwasher?
If the Washing, Drying, and End indicator lights flash on your Indesit dishwasher, there may be a water inlet hose alarm or a blocked water inlet filter. Turn off the appliance and shut off the water tap. Make sure the water inlet filter isn't blocked.
Why Indesit DFG 015 Dishwasher is making excessive noise?
Excessive noise from your Indesit dishwasher could be because dishes are rattling against each other or the sprayer arms. Another reason might be too much foam due to incorrect detergent dosage or using a detergent not designed for dishwashers.
Why are dishes and glasses covered in white film in my Indesit DFG 015 Dishwasher?
If your dishes and glasses are covered in a white film or limescale after washing in your Indesit dishwasher, the refined salt level might be low, or the dosage setting isn't right for your water hardness. Make sure the salt dispenser lid is properly closed. Also, check if the rinse aid has been used up or the dosage is too low. Note that some crockery made from non-stick material may also cause this.
What to do if Indesit DFG 015 is not cleaning dishes properly?
If your Indesit dishwasher isn't cleaning dishes well, it could be due to overloaded racks or poorly arranged crockery. Check that the sprayer arms can move freely and that you've selected an appropriate wash cycle. Also, too much foam from incorrect detergent dosage or an unsuitable detergent can cause this. Ensure the rinse aid compartment lid is correctly shut, the filter isn't dirty or blocked, and the refined salt level is adequate.
Why dishes and glasses are streaked in my Indesit DFG 015?
If your dishes and glasses are streaked or have a bluish tinge after being washed in your Indesit dishwasher, the rinse aid dosage is likely too high.
General| Type | Freestanding |
|---|---|
| Appliance placement | Freestanding |
| Control panel colour | White |
| Energy Efficiency Class | A |
| Noise Level | 49 dB |
| Number of Washing Programs | 5 |
| Washing class | A |
| Drying class | A |
| Energy consumption per cycle | 1.05 kWh |
| Height | 850 mm |
| Depth | 600 mm |
| Delay Start | Yes |
| Half Load Option | Yes |
| Water consumption per cycle | 16 L |
| Water Consumption | 16 l/cycle |
To Next Page
