This document describes the Indesit EWD 91283 Washing Machine, a household appliance designed for washing clothes. The manual provides comprehensive instructions for installation, operation, maintenance, and troubleshooting, available in multiple languages including English, Spanish, and Portuguese.
Function Description
The Indesit EWD 91283 is a fully automatic washing machine capable of handling various types of laundry with different soil levels. It offers a range of wash cycles, temperature settings, and spin speeds to cater to diverse fabric requirements. The machine is designed to be user-friendly, with a clear control panel and indicator lights guiding the user through the washing process.
Important Technical Specifications
Dimensions:
- Width: 59.5 cm
- Height: 85 cm
- Depth: 60 cm
Capacity:
- From 1 to 9 kg of laundry.
Electrical Connections:
- Please refer to the technical data plate fixed to the machine for specific electrical requirements.
- Maximum pressure: 1 MPa (10 bar)
- Minimum pressure: 0.05 MPa (0.5 bar)
- Drum capacity: 62 litres
Spin Speed:
- Up to 1200 rotations per minute.
Energy Efficiency (EU Regulation No 1061/2010):
- Energy efficiency class: A+++ (on a scale from A+++ to G, where A+++ is most efficient).
- Annual energy consumption: 217 kWh/year.
- Annual water consumption: 11690 litres/year.
- Spin-drying efficiency class: B.
- Noise level during washing: 50 dB(A) re 1 pW.
- Noise level during spinning: 75 dB(A) re 1 pW.
Wash Cycles (Examples):
The machine offers a variety of programs, including:
- Everyday Fast: Mix Colours 59', Cotton 59', Synthetics 59', Daily 45', Mix 30'.
- Delicates: Wool, Duvet, Silk/Curtains, Eco Cotton 60°C (1) and 40°C (2), Synthetics (3) and (4).
- Special Programs: Baby, Rinse, Spin + Drain.
Usage Features
Installation:
The washing machine requires careful unpacking, levelling, and connection to the electricity and water supplies. The water inlet hose should be connected to a cold water tap with a 3/4 gas thread, and the drain hose should be hooked to a drain pipe or wall drain between 65 and 100 cm from the floor. Proper levelling is crucial to prevent vibrations and excessive noise.
Control Panel:
The control panel features an ON/OFF button, DELAY TIMER button, DISPLAY, FUNCTION buttons with indicator lights, START/PAUSE button with indicator light, TEMPERATURE knob, DETERGENT DISPENSER DRAWER, WASH CYCLE knob, SPIN SPEED knob, and a DOOR LOCKED indicator light.
Starting a Wash Cycle:
- Switch on the machine by pressing the ON/OFF button.
- Load the laundry and close the door.
- Set the WASH CYCLE knob to the desired program.
- Set the washing temperature (see "Personalisation").
- Set the spin speed (see "Personalisation").
- Measure out the detergent and washing additives (see "Detergents and laundry").
- Select the desired functions.
- Start the wash cycle by pressing the START/PAUSE button. The corresponding indicator light will remain lit in a fixed manner, in green.
- To cancel the set wash cycle, press the START/PAUSE button and select a new cycle.
- At the end of the wash cycle, the END indicator light will switch on. The door can be opened once the DOOR LOCKED indicator light turns off (approximately 3 minutes).
Personalisation:
- Setting the temperature: The TEMPERATURE knob allows adjustment of the wash temperature according to the selected program.
- Setting the spin speed: The SPIN SPEED knob allows adjustment of the spin speed. The maximum spin speed varies by fabric type (e.g., Cotton 1200 rpm, Synthetics 1000 rpm, Wool 800 rpm, Silk 0 rpm).
- Functions: Various functions like "Extra Wash" (for very dirty items) and "Energy Saver" (for reduced energy consumption) can be activated by pressing the corresponding buttons.
Detergents and Laundry:
The detergent dispenser drawer has three compartments:
- Pre-wash detergent (powder) / Main wash detergent (powder or liquid): For powder detergent, use compartment 1 for pre-wash and compartment 2 for main wash. For liquid detergent, use compartment 2 only.
- Main wash detergent (powder or liquid):
- Additives (fabric softeners, etc.):
Specific instructions are provided for different fabric types (e.g., Cotton, Synthetics, Wool, Silk, Baby) and their corresponding detergent requirements. Load balancing system ensures even distribution of laundry to prevent excessive vibrations.
Maintenance Features
Cutting off Water and Electricity Supplies:
- Turn off the water tap after every wash cycle.
- Unplug the washing machine when cleaning it and during all maintenance work.
Cleaning the Washing Machine:
- The outer parts and rubber components can be cleaned using a soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
- The detergent dispenser drawer should be removed and cleaned regularly under running water to prevent blockages.
- The inlet hose should be checked at least once a year for cracks.
- The pump should be cleaned regularly to remove small objects (coins, buttons) that may fall into the pre-chamber. To access the pre-chamber, remove the cover panel on the lower front part of the washing machine.
Caring for the Door and Drum:
- Always leave the porthole door ajar in order to prevent unpleasant odours from forming.
Troubleshooting:
The manual provides a comprehensive troubleshooting guide for common issues such as:
- Washing machine not switching on.
- Wash cycle not starting.
- Water not flowing into the machine or "H2O" flashing on the display.
- Machine continuously takes in and drains water.
- Machine not draining or spinning.
- Machine vibrates a lot during the spin cycle.
- Machine leaks.
- "Function" indicator lights and "start/pause" indicator light flash, while one of the "phase in progress" indicator lights and the "door locked" indicator light remain lit in a fixed manner.
- Too much foam.
For any unresolved issues, users are advised to contact the Technical Assistance Centre.
To Next Page
Need help?
General