EasyManuals Logo

Indesit IDL 40 User Manual

Indesit IDL 40
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5
GB
Loading the Dishwasher
Before placing the dishes in the dishwasher, remove the
larger food particles to prevent the filter from becoming
clogged, which results in reduced performance.
If the pots and pans have baked-on food that is extremely
hard to remove, we recommend that they be allowed to
soak before they are washed. This will eliminate the need
for extra wash cycles.
Pull out the racks to facilitate loading the dishwasher.
How to Use the Lower Rack
We recommend that you place the most difficult to clean
items on the bottom rack: pots, pans, lids, serving dishes
and bowls, as shown in the figure to the right.
It is preferable to place serving dishes and lids on the
sides of the racks in order to avoid blocking the rotation
of the top spray arm.
- Pots, serving bowls, etc. must always be placed top
down.
- Deep pots should be slanted to allow the water to flow
out.
If the basket is the one with side inserts, then insert the
tea spoons one by one into the slots (see figure A).
Knives and utensils with sharp blades or tips should be
positioned with the sharp parts at the bottom.
Position all cutlery items so that they don't touch.
- Especially long utensils should be placed in the horizon-
tal position at the front of the upper rack.
How to Use the Upper Rack
The upper rack is designed to hold more delicate and
lighter dishware, such as glasses, coffee and tea cups
and saucers, as well as plates, small bowls and shallow
pans (as long as they are not too dirty).
- Position the dishes and cookware so that they do not
get moved by the spray of water.
How to adjust the Upper rack ...
The top rack can be adjusted using the two rack heights
(top and bottom). To adjust the rack, open up the tabs
that lock the guides and pull out the rack. Arrange the
rack with the back wheels in either the top or bottom
position and then insert it along the guides until the front
wheels are on as well. Close the tabs to lock the rack in
place (see Fig. F).
Bottom Rack
Top Rack
Load examples
1
2
3
4
Fig. F
Fig. A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Indesit IDL 40 and is the answer not in the manual?

Indesit IDL 40 Specifications

General IconGeneral
TypeFreestanding
Energy Efficiency ClassA+
Capacity10 place settings
Height85 cm
Width60 cm
Depth60 cm
Delay StartYes
Half Load OptionNo
Weight40 kg

Related product manuals