Troubleshooting
Error message When? Remedies
Descale
When the machine
indicates that
descaling is required,
is is not a sign of a
fault, but notification
that the machine,
the generator and
relevant pipes need
to be thoroughly
cleaned to get rid of
lime scale.
The flow meter measures the amount of
water used and when a preset limit is
exceeded the machine generates an alert.
Four different water hardness levels can be
set.
The reactive strip supplied with the machine
is a quick way of testing water hardness so
you can set it to the correct level.
(1 soft water ...... 4 very hard water)
The 4 settings are:
water hardness 1 = 250 litres
water hardness 2 = 130 litres
water hardness 3 = 80 litres
water hardness 4 = 40 litres
Problems occur when the descaling
message appears right after the
appliance has been descaled. In this
case, it means that it was not done
properly and has to be repeated.
Descale.
To Next Page
Loading...