Indesit TFAA 10 - Freezer Room Door Reverse

 
1
2
3
4
1
3
4
2
BEFORE DOOR REVERSE
AFTER DOOR REVERSE
1. Unscrew the two plastic screws (1) on the left side with screwdriver.
2. Take off the two screws caps(2) on the door handle bracket (3) and uninstall the
door handle bracket(3).
3. Unscrew the freezer room door (4) on the right side and takeit off. Then reverse
it and install it to the left side by using the same screws.
4. Reverse the door handle bracket(3) and install it onto the right side and put on the
2 screw caps (2).
5. Install the two plastic screws(1) onto the right side with screwdriver.
4