Indesit WIA 102 - Personalisations; Setting the Temperature; Functions: to Enable a Function

7
GB
ServiceTroubleshootingPrecautions CareProgrammes DetergentsInstallation Description
Personalisations
Setting the temperature
Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash (
).
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function Effect Comments
Enabled with
programmes:
Rapid
Cuts the duration
of the wash cycle
by 30%.
1, 2, 3, 4,
5, 6, 7
1000
500
Reduces the
spin speed.
All
programmes
except for 10
and draining.
Anti-
crease
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
When this function is set, programmes 5, 6, 7, 9, 10 will end with
the laundry left to soak (Anti-crease) and the Rinse cycle phase
LED will flash.
- to conclude the cycle, press the START/PAUSE button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/PAUSE button.
5, 6, 7, 9, 10,
Delicate
Rinse cycle.